Cell Parameter List

In Breathe Simulate, these parameters define cell design, format, and operating bounds for virtual-cell simulation.

Cell Design Parameters

Name	Unit	Description	Minimum Value	Maximum Value
Anode	-	Anode material selection	-	-
Cathode	-	Cathode material selection	-	-
electrolyte	-	Electrolyte selection	-	-
NPratio	-	Anode to cathode capacity ratio	0.7	3.0
Vmin_V	V	Minimum operational cell voltage	2.0	3.5
Vmax_V	V	Maximum operational cell voltage	3.6	4.65
anodePorosity	-	Anode porosity	0.1	0.9
cathodePorosity	-	Cathode porosity	0.1	0.9
separatorPorosity	-	Separator porosity	0.1	0.9
anodeThickness_um	um	Negative electrode thickness	5	150
cathodeThickness_um	um	Positive electrode thickness	5	150
anodeArealLoading_mAhcm2	mAh/cm2	Anode areal loading	0.1	50.0
cathodeArealLoading_mAhcm2	mAh/cm2	Cathode areal loading	0.1	50.0
anodeMassLoading_mgcm2	mg/cm2	Anode mass loading	0.5	200.0
cathodeMassLoading_mgcm2	mg/cm2	Cathode mass loading	0.5	200.0
copperThickness_um	um	Negative electrode current collector thickness	5	50
aluminumThickness_um	um	Positive electrode current collector thickness	5	50
separatorThickness_um	um	Separator thickness	5	50
electrolyteBuffer_rel	-	Extra electrolyte relative to pore volume	-1	10
lamne	%	Loss of active material in negative electrode	0.0	0.3
lampe	%	Loss of active material in positive electrode	0.0	0.3
lli	%	Loss of lithium inventory	0.0	0.3

Format Parameters

Name	Unit	Description	Minimum Value	Maximum Value
format	-	Cell format selection (for example, cylindrical or cuboid)	-	-
housingThickness_mm	mm	Housing thickness	0.1	10.0
thickness_mm	mm	Cell thickness (cuboid)	1.0	100.0
length_mm	mm	Cell length (cuboid)	1.0	1000.0
width_mm	mm	Cell width (cuboid)	1.0	1000.0
height_mm	mm	Cell height	1.0	1000.0
diameter_mm	mm	Cell outer diameter (cylindrical)	1.0	1000.0
innerDiameter_mm	mm	Cell inner diameter (cylindrical)	0.1	-

Version 73723266